SOC Estimation of a Traction Battery Pack Using CSTEKF
Lithium-ion batteries serve as the core energy storage and release component in a traction battery pack. The real-time and accurate
Lithium-ion batteries serve as the core energy storage and release component in a traction battery pack. The real-time and accurate
My research focuses on the safety and reliability of traction battery packs. I have spent years analyzing real-world operating data
I begin this research by observing a crucial shift in the global automotive industry. A new round of technological revolution
Based on a comprehensive investigation into machine learning–driven methodologies for predicting the health of electric vehicle batteries, my research established
1 Introduction New energy vehicles have become a crucial direction for the low-carbon and green transformation of the global automotive
In my research, I systematically investigated the cooling performance of a traction battery pack under the coupled effect of spray
The rapid growth of the global economy has intensified the consumption of traditional fossil fuels and worsened environmental pollution. Among
Chapter 1. Introduction and Research Significance My research focuses on the thermal management of a traction battery pack, which is
The growing demand for electric vehicles has made the thermal management of traction battery packs a critical engineering challenge. As
In pursuit of advancing electric vehicle technology, this thesis investigates the remaining capacity prediction of a traction battery pack, specifically
In recent years, traction battery pack systems in new energy vehicles have demanded increasingly compact, lightweight, and cost-effective current sensing
在全球能源结构转型与交通电动化持续加速的今天,牵引电池组是纯电动汽车动力系统的核心储能部件,其热安全性与能量效率已成为行业的主要关切。大量研究表明,锂离子牵引电池组的最佳运行窗口通常介于 25–40°C 之间,且电池包内温度不均匀性应控制在 5°C 以内。然而,牵引电池组在运行过程中会产生显著的热量。若热量未及时带走,电池温度会持续上升,从而加速内部副反应,甚至引发热失控;反之,在低温环境下,电池内阻升高,可用容量和功率输出会明显衰减。更复杂的是,传统热管理系统在调节温度过程中所消耗的能量会显著缩短整车续驶里程。因此,如何在精确管理牵引电池组温度的同时抑制热管理系统自身能耗,已成为亟待解决的关键问题。本文围绕“温度—能耗协同控制”这一核心目标,系统开展了牵引电池组热管理架构设计、多物理场建模、关键参数标定以及多工况控制策略研究。 本研究采用理论分析、实验标定与联合仿真相结合的方法。首先,基于牵引电池组生热原理与传热行为建立电—热耦合模型;接着搭建整车动力系统与热管理系统的一维仿真模型,并通过实验数据对模型精度进行验证。随后,采用最优拉丁超立方抽样(OLHS)识别热管理系统中的关键控制变量;最后,针对低温、常温与高温三种环境类别,分别设计 PID、非线性模型预测控制(NMPC)以及灰狼优化算法与 NMPC 相结合的 GWO-NMPC 控制策略。仿真结果表明,所提出的分层控制策略在温度跟踪能力和能耗经济性方面均优于常规阈值控制与传统 PID 控制。 在本文的研究框架中,首先针对牵引电池组建立等效电路模型。选用 Rint 模型作为电池电特性的等效描述,其端电压 \(U_b\) 与负载电流 \(I_b\) 满足如下关系:
1. Introduction and Literature Review The depletion of traditional fossil energy sources, such as petroleum and coal, in conjunction with
With the rapid advancement of renewable energy vehicles, thermal management of traction battery packs has become a critical technological breakthrough.
As a researcher focused on sustainable supply chains, my work primarily addresses the inefficiencies and strategic challenges embedded in the
1. Introduction The rapid expansion of the new-energy vehicle industry has been driven by the dual imperatives of reducing dependence
In this paper, I present my research on the charge and protection circuit for a lithium iron phosphate traction battery
In the past decade, the rapid growth of electric unmanned aerial vehicles (UAVs) has created new requirements for compact, lightweight
The rapid development of electric vehicles has brought about a dramatic increase in the number of retired lithium-ion batteries from
1. Introduction and Research Motivation Lithium-ion batteries have become the dominant energy source for modern electric vehicles because of their
Temperature control is a critical concern in the development of high-energy-density lithium-ion battery systems for electric vehicles. In this work,
Chapter 1. Introduction and Background 1.1 Motivation and Significance of the Research The power lithium-ion battery represents a new class